Fibre saturation point FSP
Fibre Saturation Point (FSP) relates to the moisture content (MC) of timber. Saturation Point (SP) may also be used with reference to other materials such as soil, but in both cases it refers to the point at which pores or cells are 'full' with water.
The FSP of timber will vary between species but it is normally accepted as averaging around 30%MC (moisture content), that being the percentage ratio of the wet wood to the theoretical weight of the dry wood. This level of MC is significant because it is considered to be the point of reasonable movement ie when wood that is significantly above this MC level dries its physical and mechanical properties change, which can lead to deformation.
Wood is hygroscopic so moisture levels can change in relation to the localised environment. As wood dries it shrinks, and as it absorbs moisture up it expands, the severity of which depends on the amount of moisture lost or gained. When wood is at the FSP of 30% further drying is less likely to cause significant deformation and it is therefore considered more stable or predictable in terms of being worked with.
The point at which timber stabilises in balance with the moisture of its own environment (which is normally below the FSP) is referred to as Equilibrium Moisture Content (EMC). This figure will vary depending on the species but more importantly with the moisture and temperature of the local environment, this hygroscopic characteristic of timber can be beneficial to internal environments when exposed internally. Fore more information see: Equilibrium Moisture Content.
[edit] Related articles on Designing Buildings
Featured articles and news
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.